prestressed-power-spring.jpg

Introduction

[Prestressed Power Spring] / [Customized Prestressed Power Spring]

Prestressed Power springs are made of rectangular section material, are wound flat, and have either special retaining holes or bends on both ends.  As the length-to-thickness ratio (L/t) increases, the spiral space between coils increases rapidly.  To reduce the space required and maintain a reasonable amount of deflection (turns), prestressed power springs are retained in some type of housing or case in application.

Feature of Spring

[Prestressed Power Spring]


powerspring-mounted-in-holder-(3).jpg


1. Material

2. T=Material thickness

3. W=Width

4. Da=Shaft diameter

5. Di=Inside diameter of holder

    (Outside diameter of spring)


Application
[Prestressed Power Spring]

However, prestressed powers can store 25%~55% greater energy than power springs. It also has higher turns than power spring when their sizes are the same.
 
Power Diagram
[Prestressed Power Spring]


power-diagram-model.jpg

Add To Inquiry

TOTAL: 9

View:

Model : PPS-026

Model : PPS-028

Model : PS-021

Model : PS-022

Model : PPS-032

Model : PPS-021

Model : PPS-008

Model : PPS-014

Model : PPS-023