Constant Force Spring CFS-111

• Material : Type 301 stainless steel is typically used for most applications. High-carbon steel and other materials may be required.
• A wide variety of materials are available for use depending on your application.
• Thickness : 0.04 - 1.0mm
• Width : 2.5 - 90mm

Introduction
[Constant Force Spring] / [Customized Constant Force Spring]

Constant force springs are a special variety of extension spring.  They consist of a spiral of strip material with built-incurvature.  When the strip is extended the inherent stress resists the loading force, just as in a common extension spring, but at a nearly constant rate.

In use, the constant force spring is usually mounted with a drum and the free end attached to the loading force.  This relationship can be reversed, however, with the free end mounted stationary and the constant force spring itself providing the working force, as with carbon brushes in electrical apparatus.

Feature of Spring
[Constant Force Spring application]

1.Material

2.T=Material thickness

3.W=Width

4.Total length

5.I.D=Inside diameter

6.O.D=Outside diameter

7.In/Ext=Initial extension

8.Wo/Ext=working extension

9.A=End configuration centerline hole to end

10.B=End configuration hole diameter

11.Load

Application
[Constant Force Spring]

Power Diagram
[Constant Force Spring]