• Constant Force Spring CFS-014

Constant Force Spring CFS-014

Model : CFS-014

  • Material : Type 301 stainless steel is typically used for most applications. High-carbon steel and other materials may be required.
  • A wide variety of materials are available for use depending on your application.
  • Thickness : 0.04 - 1.0mm
  • Width : 2.5 - 90mm

[Constant Force Spring] / [Customized Constant Force Spring]

Constant force springs are a special variety of extension spring.  They consist of a spiral of strip material with built-incurvature.  When the strip is extended the inherent stress resists the loading force, just as in a common extension spring, but at a nearly constant rate.

In use, the constant force spring is usually mounted with a drum and the free end attached to the loading force.  This relationship can be reversed, however, with the free end mounted stationary and the constant force spring itself providing the working force, as with carbon brushes in electrical apparatus.

Feature of Spring
[Constant Force Spring application]

constant force springs


2.T=Material thickness


4.Total length

5.I.D=Inside diameter

6.O.D=Outside diameter

7.In/Ext=Initial extension

8.Wo/Ext=working extension

9.A=End configuration centerline hole to end

10.B=End configuration hole diameter


[Constant Force Spring]

Power Diagram
[Constant Force Spring]